Skip to content
Locally Owned in Brentwood, CA
(201) 277-9344
Technician marking the location of a slab leak on a tile floor

Slab Leak Detection & Repair in Brentwood, CA

We find the leak under your foundation before anything is opened, then explain your repair options: spot repair, reroute, or repipe.

  • Licensed & Insured
  • 24/7 Emergency
  • Upfront Pricing
  • Locally Owned in Brentwood

Get Your Free Quote

Free on-site assessment. Upfront, transparent pricing.

Prefer to call? (201) 277-9344

No obligation. Upfront pricing. Licensed & insured.

Most Brentwood homes sit on concrete slab foundations, and many built from the 1990s through the 2000s have copper water lines running under or through that slab. East County's clay soils swell when wet and shrink in our hot, dry summers, and that movement, along with hard water and the constant expansion of hot-water lines, wears pinholes in pipe you can't see. A slab leak can run for weeks before anyone notices, showing up only as a higher water bill, a warm spot on the floor, or the meter spinning with every tap off.

Finding it accurately is the whole game. We start by confirming there is a leak and isolating whether it's on the hot or cold side, then locate it with acoustic listening equipment and thermal imaging so we can mark the spot before any flooring comes up. From there you have real choices. A single leak in an accessible spot can often be repaired directly through a small opening in the slab. If the line has already leaked once or the copper is thin, rerouting that line overhead through walls or the attic usually costs less disruption than breaking concrete and avoids the next leak in the same pipe. For homes with repeated leaks, a full repipe is the permanent answer.

Small slab opening exposing a leaking copper line

What’s included

  • Meter and pressure testing to confirm a leak and isolate hot vs. cold side
  • Acoustic and thermal-imaging leak location before any demolition
  • Direct spot repair through a small slab opening when it makes sense
  • Line reroute (abandoning the under-slab section) with PEX or copper
  • Whole-home repipe for homes with repeated slab leaks
  • Written findings and photos for your insurance claim

Signs you need slab leak detection & repair

  • A warm or hot spot on a tile or wood floor
  • The sound of running water when every fixture is off
  • Water meter moving with nothing running
  • An unexplained jump in your water bill
  • Damp carpet, lifting flooring, or new cracks near a wall
  • Water heater running more often than it should (hot-side leak)
PEX lines rerouted through an attic to bypass a slab leak

Brentwood code note: Reroutes and repipes require a plumbing permit and inspection. We pull the permit and schedule the inspection for you.

What affects your price

We never quote blind. After a free on-site assessment you get one clear, upfront price — no surprises. The main factors:

  • Free on-site assessment with an upfront, written quote
  • Leak location and how easily it can be reached
  • Spot repair vs. reroute vs. full repipe
  • Flooring type over the leak (tile, hardwood, carpet)
  • Permit requirements for reroutes and repipes

How It Works

How it works

Our proven process for slab leak detection & repair in Brentwood.

  1. 1

    Free on-site assessment of your home and hot-water needs

  2. 2

    Transparent written quote and honest unit recommendation

  3. 3

    Permit pulled and site prepped

  4. 4

    Professional installation with haul-away of the old unit

  5. 5

    Testing, calibration, and a homeowner walkthrough

  6. 6

    Final city inspection and a spotless cleanup

Why choose us

  • Leak located and marked before we open anything
  • We lay out spot repair, reroute, and repipe options with the trade-offs
  • Familiar with how Brentwood's clay soils and slab construction cause these leaks
  • Documentation you can hand to your insurance adjuster

Slab Leak Detection & Repair across East Contra Costa

We bring slab leak detection & repair to Brentwood and every nearby Delta community:

Frequently Asked Questions

  • Turn off every fixture and check your water meter. If the leak indicator or dial keeps moving, water is going somewhere. Add a warm spot on the floor or the sound of running water and a slab leak is likely. We confirm with testing and locate it before recommending a repair.

Need slab leak detection & repair in Brentwood?

Call now or request your free, upfront quote online — licensed, local, and same-day.

No hot water? We offer 24/7 same-day service.

Call NowFree Quote